October 2018 - gbe0.com

Posted October 29, 2018April 15, 2021Leave a commentPosted in MX/vMXMX/vMX

Juniper vMX – Intel SR-IOV Crashing

UPDATE: A new copy of the i40e driver has been provided by Juniper (unofficially). You can try this at your own risk, see here for details. When using a Juniper vMX with a Intel X520 or Intel X710 based card and SR-IOV, under load the vFPC may crash. This seems […]

Posted October 29, 2018April 17, 2021Leave a commentPosted in Powershell, WindowsPowershell, Windows

Add IPv6 address with Powershell

These steps will configure IPv6 on a network adapter using Powershell. Adding an IPv6 address Make sure Powershell is launched with Administrator permissions. Get the ifIndex for the network adapter that you want to configure the IPv6 address on: In this case we would like to add the IPv6 settings […]

Posted October 22, 2018April 17, 2021Leave a commentPosted in VirtualVirtual

VMWare vCenter 6.7U1 Appliance Upgrade

With VMWare 6.7U1 now released I decided to upgrade a small cluster of servers to the new release. As I run VMWare vCenter (the appliance version) I also wanted to upgrade that. The first issue I can into is the appliance showed no updates available. From the “Update” tab on […]

Posted October 18, 2018April 17, 20212 CommentsPosted in MX/vMXMX/vMX

Juniper MX – Rebooting a MS-MIC-16G

I experienced a strange issue after making some configuration changes to a Juniper MX104 device with a MS-MIC-16G installed. After removing some NAT rules the services interface that the NAT service was attached to started doing a large amount of traffic. The same change was made on a second router […]